DARKROOM PRODUCTS

View catalog pages for:

DARKROOM PRODUCTS

SEBASTIAN PVC DARKROOM EQUIPMENT

SEBASTIAN MODEL: OC-1012 SAFELIGHT

FOR LARGE BLACK & WHITE PRINT PROCESSING DARKROOMS

This Safelight fixture produces adequate general illumination throughout a large black & white photo darkroom where students can easily see to operate enlargers and process prints. The Safelight produced by this fixture is refected from a white ceiling and floods the darkroom with diffused safe light for handling enlarging paper for up to six minutes. See sketch below for an ideal and safe way to Safelight a black & white printing darkroom.

Click to download pdf for the darkroom Safelight

These darkroom items are impervious to all photo darkroom chemicals.

Click on the page numbers below to view the catalog pages

DELUXE DRYING CABINET

Model DF80R
Right hand opening door pictured with optional S-1 slide assemblies and W-2 Inspection Window. Two 10 clip rods included with all dryers (Model CR10)

CR Stainless Clip Rod

California Stainless has manufactured this original DF80 drying cabinet for over 40 years. It is considered the top of the line within the industry because of its tested performance. record. Outside of cleaning it requires almost no maintenance, primarily due to the high grade of durable components. Fan or heater replacement is almost unheard of in this dryer.

Cabinet is heavy gauge steel coated with chemical resistant primer and polyurethane. Features include adjustable floor leveling mounted in back of dryers. Reinforced door has positive latch handle and is securely mounted with heavy duty piano hinge. Optional inspection windows with interior light may be ordered in viewing is desired. Stainless cabinets are also available.

Electrical is approved by recognized testing laboratory, Dryer is equipped with adjustable heat thermostat, variable 60 minute timer with automatic shut off or continuous operation. 120 VAC, 60 Hz, 14 Amps.

Filtration System. All incoming air passes through a disposable air filter located beneath dust cover on top of dryer. This cover prevents dust buildup when dryer is not in use, and prolongs filter life.

Model
Accessories

CR-10
Stainless 10 clip rod, removable

S-1
10 clip slide assembly, installed

CR-2
2 clip rod - accepts 11x14 or 16x20

W-2
Inspection Window & interior light

DF220
Conversion to 230 VAC, 50/60 Hz

PR-5
4 Print Drying Racks with Brackets

C-4
Weighted clips, set of 4

WL-8
Wall Bracket for loading over wash area

AF-3
Air Filter, disposable (pack of 6)

Film Clip Assemblies. Two CR-10 clip rods are included with all dryers.

(1) Removable stainless rods with 10 stainless clips is the most effective drying method. Clip rods may be placed in optional room wall brackets near wash area, loaded, then placed in cabinet. This is particularly time saving with sheet film loading.

(2) film clip rods mounted to side extensions are a popular option. Loading and unloading of film is easier. Film first put in the back can be retrieved without reaching through wet film.

(3) Thru Wall double door dryer uses side instead of back clip rod supports.

Model	Description	Size	Capicity
DF80R DF80L DF80RS DF80LS DF80D	Painted Steel, R.H. Opening Painted Steel, L.H. Opening Stainless, R.H. Opening Stainless, L.H. Opening Thru-Wall Double Door	I.D. 24x24x73" H O.D. 24¼x28x85"H	80 Rolls of 36 exp. 35mm or 40 rolls of 120 film, 60 sheets of 8x1O", 180 sheets of 5x7" or smaller.

SPACE SAVER DRYING CABINET

Fast drying cabinet with minimum space requirements. A quality cabinet assembly built to last a lifetime. Dries up to 40 rolls of 36 exposure, 35mm film. &so accepts 120 or 220 rolls or sheet film. Available in two cabinet materials, heavy gauge steel with chemical resistant primer and polyurethane finish or stainless steel. Cabinet has adjustable leveling pads to correct floor irregularities, heavy duty positive door latch, and stainless drip pan. Filtration system includes dust cover and disposable filter. Electrical features include fan and heating assembly controlled with heat thermostat and variable 60 minute timer for automatic shut-off or continuous operation. Electrical cord, 8 feet, supplied. Unit is approved by recognized testing laboratory. 120 VAC, 60 Hz, 14 Amps.

Dryers include two stainless cabinet brackets and two removable stainless clip rods with 9 stainless dips per rod. Extra stainless cabinet brackets may be installed to increase sheet film capacity (Model WB10). Shipping weight - 175 pounds. A

Model	Description	Size	Capicity
DF82R	Painted Steel, R.H. Opening	I.D. 15x20x72"H O.D. 15¼x23x85"H	36 rools of exp. 35mm or 20 rolls of 120 film 18 Sheets of 8x10 36 Sheets of 5x7 or smaller
DF82L	Painted Steel, L.H. Opening
DF82RS	Stainless, R.H. Opening
DF82LS	Stainless, L.H. Opening

Model	Accessories
CR-9	Stainless 9 clip rod, removable
CRR-2	2 clip rod - accepts 11x14 or 16x20
DF220	Conversion to 230 VAC, 50/60 Hz
PR-4	4 Print Drying Racks with Brackets
WB-10	Extra Cabinet Bracket, installed
WL-8	Wall Bracket for laoding over Wash Area
AF-2	Air Filter, disposable (pack of 6)

DF82R
Rigt hand opening door. Two 9 clip rods (Model CR-9) included with all Dryers.

STAINLESS STEEL MINI DRYER

Model DF10SL - Left hand opening door
Model DR10SR - Riht hand opening door

All stainless steel construction. Designed for small capacity requirements. Overall size is 15"23"x38" high. Capacity of 10-8"x10" or 5-16"20" sheets. Dryer includes one 10 clip rod (Model CR105). Electrical 120 VAC, 60 Hz, 12 Amps. Shipping weight is 120 lbs.

Accessories
CR10S - Removable 10 clip rod WL8 - Wall Bracket F10 - Filter

Model P20S

RC PRINT DRYER

HIGH SPEED VARIABLE HEAT RC DRYER
Entrance roller tension design allows prints to be pulled back out and reset angle without damaging soft emulsion. Especially practical when working full machine width or maximum production rate.

RC Black & Whit or Color
Controls - adjustable speed and heat.
Accepts from 3" to 20" wide.
Double squeegee system with blotters.
All stainless steel construction.
Drip tray and detachable print rack.
Capacity - 500 8"x10" Black & White SW prints per hour.
Table Top Dryer fits standard tables.
Diffusion transfer (PMT type) and stabilization material also acceptable.

Model: P20S

Material Width: Up to 20" W.
Dimensions: 26"Wx17"Dxl3"H add 25" to depth for rear print tray.
Shipping Weigt: 80 lbs.
Electrical: 120V AC 60 Hz 11 Amps with grounded power cord.

For 23V AC operation, order: Step down transformer.